SMAA help

[johannmeya]

First, thanks to everyone for the help, advice and support. I may be "down" now, but I won't give up. Round#2 is next. Better planning, better strategy.

I have two questions right now. I loaded SMAA Compass - but I couldn't find ver5? The latest version I found was only a reference to ver3. (on the TREND) thread. Is ver5 available somewhere?

The other question is that maybe I am not sure how SMAA MACrossOver works. I tried to do a test and wanted to see the MA on a chart.

Both are 5min, and MA's are 5 & 20, for both radarscreen and chart. Usually it seemed to work, but on a couple stocks it indicates "OVER" when the fast MA is under the slow MA? I have attached a pic. This is a random pick - shouldn't FxS be "UNDER" here?
(Thick yellow line is 20MA, and dotted yellow line is 5MA)

Aloha,
Johann

[TheRumpledOne]

{_SMAA_COMPASS_Ver5}


{Attn: TradeStation
if this indicator is posted on the TradeStation Forum, I, TheRumpledOne, did NOT post it there,
so I can't be blamed for this indicator having my contact info.}


{Programmer: Avery T. Horton, Jr. aka TheRumpledOne,
gifts and donations accepted, PO Box 43575, Tucson, AZ 85733 }

{ © Copyright 2006 Avery T. Horton, Jr.}



Inputs:

iPeriods(30),

iDecimals(2),

iMsgLong("LONG"),

iMsgShort("SHORT"),

iMsgFlat("FLAT"),


iMsgXAbove("XA"),

iMsgXBelow("XB"),


idummy("");


inputs:

Price( Close ),

iMode("Auto"),
iRSILength(2),

iFrequency(1),

iMROPeriods(200),

iEMAFast(5),
iEMAMed(13),
iEMASlow(26),

OverSold( 1 ),
OverSold2( 5 ),
OverBought( 90 ),
OverBought2( 95 ),


ISWINGDUMMY("");

variables:

xPlot1(""),
xPlot2(""),
xPlot3(""),
xPlot4(""),

xPeriods(60),
xInterval(0),

sFirstPass(true),

xInd(0),
tInd(""),
tAlert("");

variables:

FG1(white),
BG1(black),

fg2(white),
bg2(black),

fg3(white),
bg3(black),

fg4(white),
bg4(black);




{commentary variables}
variables:
xcomm(0),
oComm1( "" ),
oComm2( "" ),
oComm3( "" ),
oComm4( "" ),
oComm5( "" ),
oComm6( "" ),
oComm7( "" ),
oComm8( "" ),
oComm9( "" ),
oComm10( "" );



variables:

xBars(0),

DayTop( 0 ),
DayBottom( 0 ),
DayHigh( 0 ),
PrevDayMid( 0 ),
DayLow( 0 ),

xMROCLXAFAST(0),
xMROCLXBFAST(0),
xMROCLXFAST(0),

xMROMedXASlow(0),
xMROMedXBSlow(0),
xMROMedXSlow(0),


xFrequency(60),
xRSILength(2),


tSwing(""),

tTrade(""),
xEMAMed(0),
xEMASlow(0),


xDiff(0),

xOpen1(0),

xClose0(0),

xClose1(0),


xClose2(0),


xEMAFast(0),
xEMADiff(0),

xRSI(0),
sRSI(0),

Srt(0),

tPrice(""),
tPivot(""),
xdummy(0);



variables:

xDate(0),
xTime(0),
xOpen(0),
xClose(0),
xHigh(0),
xLow(0);



{first time through}

if sFirstPass
then begin

sFirstPass = false;

{bar test}

If bartype = 4
then xInterval = 94
else
If bartype = 3
then xInterval = 93
else
If bartype = 2
then xInterval = 92
else
If bartype = 1
then begin
xInterval = BarInterval;
end; { If bartype = 1 }

end; {if sFirstPass}


{ INITIALIZE }

FG1 = WHITE;
BG1 = BLACK;

fg2 = WHITE;
bg2 = BLACK;

fg3 = WHITE;
bg3 = BLACK;

fg4 = WHITE;
bg4 = BLACK;

tInd = "";
tAlert = "";

xDate = Date ;

xTime = Time ;

xOpen = Open;

xClose = Close;

xHigh = High;

xLow = Low;

{ PROCESSING }



DayHigh = HighD(0) ;
DayLow = LowD(0) ;

if xInterval < 92
then PrevDayMid = ( High[1] + Low[1] ) * .50
else PrevDayMid = ( HighD(1) + LowD(1) ) * .50 ;


If close crosses above PrevDayMid
or close crosses below PrevDayMid
then xBars = 1
else xBars = xBars + 1;

// xBars = _fBarsSinceXover( close, PrevDayMid, iPeriods) ;


{ AUTO MODE - ONLY PROCESS FOR 60 MINUTE OR DAILY CHARTS }

If bartype = 2
then Srt = 92;

If bartype = 1
then begin
Srt = BarInterval;
end; { If bartype = 1 }


xFrequency = iFrequency;
xRSILength = iRSILength;

{mode test}

If iMode = "Auto"
then begin
xFrequency = Srt;
If xFrequency < 15
then xRSILength = 10
else xRSILength = 2;
end; {If iMode = "Auto" }




{ Alert criteria }

xEMAFast = XAverage( Price , iEMAFast );
xEMAFast = round(xEMAFast,iDecimals);

xEMAMed = XAverage( Price , iEMAMed );
xEMAMed = round(xEMAMed,iDecimals);

xEMASlow = XAverage( Price , iEMASlow );
xEMASlow = round(xEMASlow,iDecimals);



xMROCLXFAST = _fBarsSinceXOver(CLOSE , xEMAFast , iMROPeriods );

xMROMedXSlow = _fBarsSinceXOver(xEMAMed , xEMASlow , iMROPeriods );

{ medium x slow criteria }


if xEMAMed > xEMASlow
then begin
tSwing = iMsgLong;
FG1 = BLACK;
BG1 = green;
end;

if xEMAMed < xEMASlow
then begin
tSwing = iMsgShort;
FG1 = BLACK;
BG1 = red;
end;


if xEMAMed = xEMASlow
then begin
tSwing = iMsgFlat;
FG1 = BLACK;
BG1 = YELLOW;
end;

if xEMAMed crosses above xEMASlow
then begin
tSwing = iMsgXAbove;
FG1 = darkgreen;
BG1 = white;
end;

if xEMAMed crosses BELOW xEMASlow
then begin
tSwing = iMsgXBelow;
FG1 = red;
BG1 = white;
end;

{close x fast criteria }

If close > xEMAFast
then begin
tTrade = iMsgLong;
Fg2 = BLACK;
Bg2 = green;
end;

If close < xEMAFast
then begin
tTrade = iMsgShort;
Fg2 = BLACK;
Bg2 = red;
end;

If close = xEMAFast
then begin
tTrade = iMsgFlat;
Fg2 = BLACK;
Bg2 = YELLOW;
end;


If close crosses above xEMAFast
then begin
tTrade = iMsgXAbove;
Fg2 = darkgreen;
Bg2 = white;
end;

If close crosses BELOW xEMAFast
then begin
tTrade = iMsgXBelow;
Fg2 = red;
Bg2 = white;
end;


{ RSI Alert criteria }

xRSI = RSI( CLOSE, xRSILength );


if xRSI <= OverSold
then begin
Fg3 = white;
Bg3 = darkblue;
end
else
if xRSI <= OverSold2
then begin
Fg3 = black;
Bg3 = cyan;
end;


if xRSI >= OverBought
then begin
Fg3 = WHITE;
Bg3 = DARKred;
end;



if xRSI >= OverBought2
then begin
Fg3 = WHITE;
Bg3 = red;
end;


{
iMsgLong("LONG"),

iMsgShort("SHORT"),

iMsgFlat("FLAT"),

iMsgXAbove("XA"),

iMsgXBelow("XB"),

}


If CLOSE CROSSES ABOVE PrevDayMid
then begin
tInd = iMsgXAbove ;
tAlert = tInd ;
Fg4 = BLACK;
Bg4 = yellow;
end
else
If CLOSE CROSSES below PrevDayMid
then begin
tInd = iMsgXBelow ;
tAlert = tInd ;
Fg4 = red;
Bg4 = yellow;
end
else
If CLOSE > PrevDayMid
then begin
tInd = iMsgLong ;
Fg4 = BLACK;
Bg4 = green;
end
else
If CLOSE < PrevDayMid
then begin
tInd = iMsgShort ;
Fg4 = BLACK;
Bg4 = red;
end
else begin
tInd = iMsgFlat ;
tAlert = tInd ;
Fg4 = magenta;
Bg4 = white;
end;


{ Alert }

if tAlert <> ""
and tAlert <> tAlert[1]
then Alert( tAlert ) ;


{ PLOT }


xPlot1 = tSwing + " " + numtostr(xMROMedXSlow , 0);

xPlot2 = tTrade + " " + numtostr(xMROCLXFAST , 0);

{
xPlot3(""),
}

xPlot4 = tInd + " " + numtostr(xBars , 0);


Plot1( xPlot1 , "MxS", fg1 ) ;
SetPlotBGColor( 1, bg1);

Plot2( xPlot2 , "CxF", fg2 ) ;
SetPlotBGColor( 2, bg2);

Plot3( xRSI, "RSI", fg3 ) ;
SetPlotBGColor( 3, bg3);

Plot4( xPlot4 , "Middle", fg4 ) ;
SetPlotBGColor( 4, bg4 );


xComm = _fCommentary(oComm1, oComm2, oComm3, oComm4, oComm5, oComm6, oComm7, oComm8, oComm9, oComm10);

CommentaryCl(oComm1 );

CommentaryCl(oComm2 );
CommentaryCl(oComm3 );
CommentaryCl(oComm4 );
CommentaryCl(oComm5 );
CommentaryCl(oComm6 );
CommentaryCl(oComm7 );
CommentaryCl(oComm8 );
CommentaryCl(oComm9 );
CommentaryCl(oComm10 );

{
CommentaryCl( "Open_AvgCost: ", NumToStr( Open_AvgCost , iDecimals) );


CommentaryCl( "xInd: ", NumToStr( xInd , iDecimals) );


CommentaryCl( "xFreeShares: ", NumToStr( xFreeShares , 0 ) );

}

[TheRumpledOne]

Make sure you have enough additional bars loaded.

I usually use 400 on 1 - 60 minute charts.

[dad8]

won't verify in TS 81

says word not recognised , see att

.


thanks for your help

dad8

[christhlo2]

Hi dad8,

Take a look at the forum with the following heading, it should solve you problem:

kreslik.com - Traders Community Forum Index » strategy trading forums » indicators » SMAA_MIDDLE_TRADE - Enhancement