NEW INDICATOR - TRO EVALUATOR - YOU'RE GOING TO LOVE THIS!!

post your indicators here

Moderator: moderators

User avatar
TheRumpledOne
rank: 10000+ posts
rank: 10000+ posts
Posts: 15544
Joined: Sun May 14, 2006 9:31 pm
Reputation: 3035
Location: Oregon
Real name: Avery T. Horton, Jr.
Gender: None specified
Contact:

NEW INDICATOR - TRO EVALUATOR - YOU'RE GOING TO LOVE THIS!!

Postby TheRumpledOne » Thu Jun 29, 2006 4:58 pm

The TRO EVALUATOR works in charts and radar... iRadar user inputs controls the setting (= true for radar, = false for chart).

I gave you 8 input triggers for long/short entry/exits. But if you use that many, I am going to wonder about your trading method.

The TRO EVALUATOR tests each trigger. If the trigger is TRUE then it adds 1 to a counter. If the counter meets/exceed the signal threshold then the value is display. In other words, it tells you how many of your triggers are true.

In the example I have the entry signal set to 2 and the exit signal set to 1.

If 2 or more of my entry triggers are true, the result will be displayed.

If 1 or more of my exit triggers are true, the result will be displayed.

If the bar before my triggers were true had a signal count of 0 then the background will be WHITE to alert me that this is the first time my signal threshold was met.



Why didn't I think of this sooner?



Code: Select all

// _TRO_EVALUATOR  - evaluates user input trade triggers
   

{Attn: TradeStation
if this indicator is posted on the TradeStation Forum, I, TheRumpledOne, did NOT post it there,
so I can't be blamed for this indicator having my contact info.}


{Programmer:  Avery T. Horton, Jr.  aka TheRumpledOne,
gifts and donations accepted, PO Box 43575, Tucson, AZ 85733 }

{ © Copyright 2006 Avery T. Horton, Jr.}

inputs:

iRadar(true),       // true = radar, false = Chart

iLgEntryColor ( blue ),
iLgExitColor ( red ),

iShEntryColor ( darkmagenta ),
iShExitColor ( darkcyan ),

iLgEntrySignal( 2 ) ,
iLgExitSignal( 1 ) ,

iShEntrySignal( 2 ) ,
iShExitSignal( 1 ) ,

iLgEntryTrigger1( close crosses above xavg(close,5) and xavg(close,5) > xavg(close[1],5) ),   
iShEntryTrigger1( close crosses below xavg(close,5) and xavg(close,5) < xavg(close[1],5) ),

iLgExitTrigger1(c < c[1] and c[1] < c[2]),
iShExitTrigger1(c > c[1] and c[1] > c[2]),


iLgEntryTrigger2( close crosses above ( h[1] + l[1] ) *.5  ),   
iShEntryTrigger2( close crosses below ( h[1] + l[1] ) *.5  ),

iLgExitTrigger2(c < ( h + l ) *.5 ),
iShExitTrigger2(c > ( h + l ) *.5 ),
 
iLgEntryTrigger3( close crosses above xavg(close,21) and xavg(close,21) > xavg(close[1],21) ),   
iShEntryTrigger3( close crosses below xavg(close,21) and xavg(close,21) < xavg(close[1],21) ),

iLgExitTrigger3(false),
iShExitTrigger3(false),


iLgEntryTrigger4( close crosses above ( h + l ) *.5  ),   
iShEntryTrigger4( close crosses below ( h + l ) *.5  ),

iLgExitTrigger4(false),
iShExitTrigger4(false ),
 


iLgEntryTrigger5(false),
iShEntryTrigger5(false),

iLgExitTrigger5(false),
iShExitTrigger5(false),


iLgEntryTrigger6(false),   
iShEntryTrigger6(false),

iLgExitTrigger6(false),
iShExitTrigger6(false),
 
iLgEntryTrigger7(false),   
iShEntryTrigger7(false),

iLgExitTrigger7(false),
iShExitTrigger7(false),


iLgEntryTrigger8(false),
iShEntryTrigger8(false),

iLgExitTrigger8(false),
iShExitTrigger8(false );


variables:
 

sFirstPass(true),
 
xPlot1( 00 ),
xPlot2( 00 ),
xPlot3( 00 ),
xPlot4( 00 );

variables:
 
FG1(white),
BG1(black),

fg2(white),
bg2(black),

fg3(white),
bg3(black),

fg4(white),
bg4(black);



{ INITIALIZE }

if iRadar
then begin

FG1 = BLACK;
BG1 = BLACK;

fg2 = BLACK;
bg2 = BLACK;

fg3 = BLACK;
bg3 = BLACK;

fg4 = BLACK;
bg4 = BLACK;
end
else begin
FG1 = white;
BG1 = darkgray;

fg2 = white;
bg2 = darkgray;

fg3 = darkgray;
bg3 = darkgray;

fg4 = darkgray;
bg4 = darkgray;
end; // if iRadar


xPlot1 = 0 ;
xPlot2 = 0 ;
xPlot3 = 0 ;
xPlot4 = 0 ;



{ Alert criteria }


If iLgEntryTrigger1
then begin
   xPlot1 = xPlot1 + 1 ;
end;


If iLgEntryTrigger2
then begin
   xPlot1 = xPlot1 + 1 ;
end;

If iLgEntryTrigger3
then begin
   xPlot1 = xPlot1 + 1 ;
end;

If iLgEntryTrigger4
then begin
   xPlot1 = xPlot1 + 1 ;
end;


If iLgEntryTrigger5
then begin
   xPlot1 = xPlot1 + 1 ;
end;


If iLgEntryTrigger6
then begin
   xPlot1 = xPlot1 + 1 ;
end;

If iLgEntryTrigger7
then begin
   xPlot1 = xPlot1 + 1 ;
end;

If iLgEntryTrigger8
then begin
   xPlot1 = xPlot1 + 1 ;
end;

If iLgExitTrigger1
then begin
   xPlot2 = xPlot2 + 1 ;
end;


If iLgExitTrigger2
then begin
   xPlot2 = xPlot2 + 1 ;
end;

If iLgExitTrigger3
then begin
   xPlot2 = xPlot2 + 1 ;
end;

If iLgExitTrigger4
then begin
   xPlot2 = xPlot2 + 1 ;
end;

If iLgExitTrigger5
then begin
   xPlot2 = xPlot2 + 1 ;
end;


If iLgExitTrigger6
then begin
   xPlot2 = xPlot2 + 1 ;
end;

If iLgExitTrigger7
then begin
   xPlot2 = xPlot2 + 1 ;
end;

If iLgExitTrigger8
then begin
   xPlot2 = xPlot2 + 1 ;
end;








If iShEntryTrigger1
then begin
   xPlot3 = xPlot3 + 1 ;
end;


If iShEntryTrigger2
then begin
   xPlot3 = xPlot3 + 1 ;
end;

If iShEntryTrigger3
then begin
   xPlot3 = xPlot3 + 1 ;
end;

If iShEntryTrigger4
then begin
   xPlot3 = xPlot3 + 1 ;
end;




If iShEntryTrigger5
then begin
   xPlot3 = xPlot3 + 1 ;
end;


If iShEntryTrigger6
then begin
   xPlot3 = xPlot3 + 1 ;
end;

If iShEntryTrigger7
then begin
   xPlot3 = xPlot3 + 1 ;
end;

If iShEntryTrigger8
then begin
   xPlot3 = xPlot3 + 1 ;
end;

If iShExitTrigger1
then begin
   xPlot4 = xPlot4 + 1 ;
end;


If iShExitTrigger2
then begin
   xPlot4 = xPlot4 + 1 ;
end;

If iShExitTrigger3
then begin
   xPlot4 = xPlot4 + 1 ;
end;

If iShExitTrigger4
then begin
   xPlot4 = xPlot4 + 1 ;
end;

If iShExitTrigger5
then begin
   xPlot4 = xPlot4 + 1 ;
end;


If iShExitTrigger6
then begin
   xPlot4 = xPlot4 + 1 ;
end;

If iShExitTrigger7
then begin
   xPlot4 = xPlot4 + 1 ;
end;

If iShExitTrigger8
then begin
   xPlot4 = xPlot4 + 1 ;
end;


If xPlot1 >= iLgEntrySignal
then begin
   Fg1 = iLgEntryColor ;
end;

If  xPlot1 >  0
and xPlot1[1] = 0
then begin
   Fg1 = iLgEntryColor ;
   Bg1 = white ;
end;




If xPlot2 >= iLgExitSignal
then begin
   Fg2 = iLgExitColor ;
end;

If  xPlot2 >  0
and xPlot2[1] = 0
then begin
   Fg2 = iLgExitColor ;
   Bg2 = white ;
end;


If xPlot3 >= iShEntrySignal
then begin
   Fg3 = iShEntryColor ;
end;

If  xPlot3 >  0
and xPlot3[1] = 0
then begin
   Fg3 = iShEntryColor ;
   Bg3 = white ;
end;

 
If xPlot4 >= iShExitSignal
then begin
   Fg4 = iShExitColor ;
end;

If  xPlot4 >  0
and xPlot4[1] = 0
then begin
   Fg4 = iShExitColor ;
   Bg4 = white ;
end;


{ PLOT }


if iRadar
then begin

Plot1( xPlot1 , "LgEntry", fg1 ) ;
SetPlotBGColor( 1, bg1);

Plot2( xPlot2 , "LgExit", fg2 ) ;
SetPlotBGColor( 2, bg2);

Plot3( xPlot3 , "ShEntry", fg3 ) ;
SetPlotBGColor( 3, bg3);

Plot4( xPlot4 , "ShExit", fg4 ) ;
SetPlotBGColor( 4, bg4);
end
else begin

Plot1( xPlot1 , "LgEntry", fg1 ) ;

Plot2( xPlot2 , "LgExit", fg2 ) ;

Plot3( 0 - xPlot3 , "ShEntry", fg3 ) ;

Plot4( 0 - xPlot4 , "ShExit", fg4 ) ;
end; // if iRadar
Attachments
TRO_EVALUATOR.ELD
(9.33 KiB) Downloaded 1002 times

Please add www.kreslik.com to your ad blocker white list.
Thank you for your support.

User avatar
TheRumpledOne
rank: 10000+ posts
rank: 10000+ posts
Posts: 15544
Joined: Sun May 14, 2006 9:31 pm
Reputation: 3035
Location: Oregon
Real name: Avery T. Horton, Jr.
Gender: None specified
Contact:

Postby TheRumpledOne » Thu Jun 29, 2006 11:58 pm

I created functions so you can use my Dynamic Support and Resistance in the EVALUATOR.

I also attached a workspace so you can get up and running.
Attachments
FUNCTIONS_DYNAMIC_SR.ELD
(5.53 KiB) Downloaded 647 times
FX_EVALUATOR.tsw
(64 KiB) Downloaded 645 times

User avatar
TheRumpledOne
rank: 10000+ posts
rank: 10000+ posts
Posts: 15544
Joined: Sun May 14, 2006 9:31 pm
Reputation: 3035
Location: Oregon
Real name: Avery T. Horton, Jr.
Gender: None specified
Contact:

Postby TheRumpledOne » Fri Jun 30, 2006 12:44 am

Here's an alternate version that you can use for debugging or trading:




The triggers are placed left to right.. 12345678

So 10010000 means triggers 1 and 4 are TRUE, the rest false.

I also included a revision of _TRO_EVALUATOR in the ELD.


Code: Select all

// _TRO_EVALUATOR_ALT  - evaluates user input trade triggers
   

{Attn: TradeStation
if this indicator is posted on the TradeStation Forum, I, TheRumpledOne, did NOT post it there,
so I can't be blamed for this indicator having my contact info.}


{Programmer:  Avery T. Horton, Jr.  aka TheRumpledOne,
gifts and donations accepted, PO Box 43575, Tucson, AZ 85733 }

{ © Copyright 2006 Avery T. Horton, Jr.}

inputs:

iRadar(true),       // true = radar, false = Chart

iLgEntryColor ( blue ),
iLgExitColor ( red ),

iShEntryColor ( darkmagenta ),
iShExitColor ( darkcyan ),

iLgEntrySignal( 2 ) ,
iLgExitSignal( 1 ) ,

iShEntrySignal( 2 ) ,
iShExitSignal( 1 ) ,

iLgEntryTrigger1( close crosses above xavg(close,5) and xavg(close,5) > xavg(close[1],5) ),   
iShEntryTrigger1( close crosses below xavg(close,5) and xavg(close,5) < xavg(close[1],5) ),

iLgExitTrigger1(c < c[1] and c[1] < c[2]),
iShExitTrigger1(c > c[1] and c[1] > c[2]),


iLgEntryTrigger2( close crosses above ( h[1] + l[1] ) *.5  ),   
iShEntryTrigger2( close crosses below ( h[1] + l[1] ) *.5  ),

iLgExitTrigger2(c < ( h + l ) *.5 ),
iShExitTrigger2(c > ( h + l ) *.5 ),
 
iLgEntryTrigger3( close crosses above xavg(close,21) and xavg(close,21) > xavg(close[1],21) ),   
iShEntryTrigger3( close crosses below xavg(close,21) and xavg(close,21) < xavg(close[1],21) ),

iLgExitTrigger3(false),
iShExitTrigger3(false),


iLgEntryTrigger4( l > l[1] and l[1] > l[2]  ),   
iShEntryTrigger4( l < l[1] and l[1] < l[2]  ),

iLgExitTrigger4( h < h[2] ),
iShExitTrigger4( L > L[2] ),
 


iLgEntryTrigger5(false),
iShEntryTrigger5(false),

iLgExitTrigger5(false),
iShExitTrigger5(false),


iLgEntryTrigger6(false),   
iShEntryTrigger6(false),

iLgExitTrigger6(false),
iShExitTrigger6(false),
 
iLgEntryTrigger7(false),   
iShEntryTrigger7(false),

iLgExitTrigger7(false),
iShExitTrigger7(false),


iLgEntryTrigger8(false),
iShEntryTrigger8(false),

iLgExitTrigger8(false),
iShExitTrigger8(false );


variables:
 
xPlot1a( "" ),
xPlot2a( "" ),
xPlot3a( "" ),
xPlot4a( "" ),


sFirstPass(true),
 
xPlot1( 00 ),
xPlot2( 00 ),
xPlot3( 00 ),
xPlot4( 00 );

variables:
 
FG1(white),
BG1(black),

fg2(white),
bg2(black),

fg3(white),
bg3(black),

fg4(white),
bg4(black);



{ INITIALIZE }

if iRadar
then begin
{
FG1 = BLACK;
BG1 = BLACK;

fg2 = BLACK;
bg2 = BLACK;

fg3 = BLACK;
bg3 = BLACK;

fg4 = BLACK;
bg4 = BLACK;
}
FG1 = white;
BG1 = BLACK;

fg2 = white;
bg2 = BLACK;

fg3 = white;
bg3 = BLACK;

fg4 = white;
bg4 = BLACK;
end
else begin
FG1 = white;
BG1 = darkgray;

fg2 = white;
bg2 = darkgray;

fg3 = darkgray;
bg3 = darkgray;

fg4 = darkgray;
bg4 = darkgray;
end; // if iRadar


xPlot1 = 0 ;
xPlot2 = 0 ;
xPlot3 = 0 ;
xPlot4 = 0 ;



{ Alert criteria }


If iLgEntryTrigger1
then begin
   xPlot1 = xPlot1 + 1 ;
end;


If iLgEntryTrigger2
then begin
   xPlot1 = xPlot1 + 1 ;
end;

If iLgEntryTrigger3
then begin
   xPlot1 = xPlot1 + 1 ;
end;

If iLgEntryTrigger4
then begin
   xPlot1 = xPlot1 + 1 ;
end;


If iLgEntryTrigger5
then begin
   xPlot1 = xPlot1 + 1 ;
end;


If iLgEntryTrigger6
then begin
   xPlot1 = xPlot1 + 1 ;
end;

If iLgEntryTrigger7
then begin
   xPlot1 = xPlot1 + 1 ;
end;

If iLgEntryTrigger8
then begin
   xPlot1 = xPlot1 + 1 ;
end;

If iLgExitTrigger1
then begin
   xPlot2 = xPlot2 + 1 ;
end;


If iLgExitTrigger2
then begin
   xPlot2 = xPlot2 + 1 ;
end;

If iLgExitTrigger3
then begin
   xPlot2 = xPlot2 + 1 ;
end;

If iLgExitTrigger4
then begin
   xPlot2 = xPlot2 + 1 ;
end;

If iLgExitTrigger5
then begin
   xPlot2 = xPlot2 + 1 ;
end;


If iLgExitTrigger6
then begin
   xPlot2 = xPlot2 + 1 ;
end;

If iLgExitTrigger7
then begin
   xPlot2 = xPlot2 + 1 ;
end;

If iLgExitTrigger8
then begin
   xPlot2 = xPlot2 + 1 ;
end;








If iShEntryTrigger1
then begin
   xPlot3 = xPlot3 + 1 ;
end;


If iShEntryTrigger2
then begin
   xPlot3 = xPlot3 + 1 ;
end;

If iShEntryTrigger3
then begin
   xPlot3 = xPlot3 + 1 ;
end;

If iShEntryTrigger4
then begin
   xPlot3 = xPlot3 + 1 ;
end;




If iShEntryTrigger5
then begin
   xPlot3 = xPlot3 + 1 ;
end;


If iShEntryTrigger6
then begin
   xPlot3 = xPlot3 + 1 ;
end;

If iShEntryTrigger7
then begin
   xPlot3 = xPlot3 + 1 ;
end;

If iShEntryTrigger8
then begin
   xPlot3 = xPlot3 + 1 ;
end;

If iShExitTrigger1
then begin
   xPlot4 = xPlot4 + 1 ;
end;


If iShExitTrigger2
then begin
   xPlot4 = xPlot4 + 1 ;
end;

If iShExitTrigger3
then begin
   xPlot4 = xPlot4 + 1 ;
end;

If iShExitTrigger4
then begin
   xPlot4 = xPlot4 + 1 ;
end;

If iShExitTrigger5
then begin
   xPlot4 = xPlot4 + 1 ;
end;


If iShExitTrigger6
then begin
   xPlot4 = xPlot4 + 1 ;
end;

If iShExitTrigger7
then begin
   xPlot4 = xPlot4 + 1 ;
end;

If iShExitTrigger8
then begin
   xPlot4 = xPlot4 + 1 ;
end;


If xPlot1 >= iLgEntrySignal
then begin
   Fg1 = iLgEntryColor ;
end;

If  xPlot1 >  0
and xPlot1[1] = 0
then begin
   Fg1 = iLgEntryColor ;
   Bg1 = white ;
end;




If xPlot2 >= iLgExitSignal
then begin
   Fg2 = iLgExitColor ;
end;

If  xPlot2 >  0
and xPlot2[1] = 0
then begin
   Fg2 = iLgExitColor ;
   Bg2 = white ;
end;


If xPlot3 >= iShEntrySignal
then begin
   Fg3 = iShEntryColor ;
end;

If  xPlot3 >  0
and xPlot3[1] = 0
then begin
   Fg3 = iShEntryColor ;
   Bg3 = white ;
end;

 
If xPlot4 >= iShExitSignal
then begin
   Fg4 = iShExitColor ;
end;

If  xPlot4 >  0
and xPlot4[1] = 0
then begin
   Fg4 = iShExitColor ;
   Bg4 = white ;
end;


{ PLOT }


if iRadar
then begin

If iLgEntryTrigger1
   then xPlot1a = "1" 
   else xPlot1a = "0" ;

If iLgEntryTrigger2
   then xPlot1a = xPlot1a + "1" 
   else xPlot1a = xPlot1a + "0" ;

If iLgEntryTrigger3
   then xPlot1a = xPlot1a + "1" 
   else xPlot1a = xPlot1a + "0" ;

If iLgEntryTrigger4
   then xPlot1a = xPlot1a + "1" 
   else xPlot1a = xPlot1a + "0" ;

If iLgEntryTrigger5
   then xPlot1a = xPlot1a + "1" 
   else xPlot1a = xPlot1a + "0" ;

If iLgEntryTrigger6
   then xPlot1a = xPlot1a + "1" 
   else xPlot1a = xPlot1a + "0" ;

If iLgEntryTrigger7
   then xPlot1a = xPlot1a + "1" 
   else xPlot1a = xPlot1a + "0" ;

If iLgEntryTrigger8
   then xPlot1a = xPlot1a + "1" 
   else xPlot1a = xPlot1a + "0" ;




If iLgExitTrigger1
   then xPlot2a = "1" 
   else xPlot2a = "0" ;

If iLgExitTrigger2
   then xPlot2a = xPlot2a + "1" 
   else xPlot2a = xPlot2a + "0" ;

If iLgExitTrigger3
   then xPlot2a = xPlot2a + "1" 
   else xPlot2a = xPlot2a + "0" ;

If iLgExitTrigger4
   then xPlot2a = xPlot2a + "1" 
   else xPlot2a = xPlot2a + "0" ;

If iLgExitTrigger5
   then xPlot2a = xPlot2a + "1" 
   else xPlot2a = xPlot2a + "0" ;

If iLgExitTrigger6
   then xPlot2a = xPlot2a + "1" 
   else xPlot2a = xPlot2a + "0" ;

If iLgExitTrigger7
   then xPlot2a = xPlot2a + "1" 
   else xPlot2a = xPlot2a + "0" ;

If iLgExitTrigger8
   then xPlot2a = xPlot2a + "1" 
   else xPlot2a = xPlot2a + "0" ;



If iShEntryTrigger1
   then xPlot3a = "1" 
   else xPlot3a = "0" ;

If iShEntryTrigger2
   then xPlot3a = xPlot3a + "1" 
   else xPlot3a = xPlot3a + "0" ;

If iShEntryTrigger3
   then xPlot3a = xPlot3a + "1" 
   else xPlot3a = xPlot3a + "0" ;

If iShEntryTrigger4
   then xPlot3a = xPlot3a + "1" 
   else xPlot3a = xPlot3a + "0" ;

If iShEntryTrigger5
   then xPlot3a = xPlot3a + "1" 
   else xPlot3a = xPlot3a + "0" ;

If iShEntryTrigger6
   then xPlot3a = xPlot3a + "1" 
   else xPlot3a = xPlot3a + "0" ;

If iShEntryTrigger7
   then xPlot3a = xPlot3a + "1" 
   else xPlot3a = xPlot3a + "0" ;

If iShEntryTrigger8
   then xPlot3a = xPlot3a + "1" 
   else xPlot3a = xPlot3a + "0" ;




If iShExitTrigger1
   then xPlot4a = "1" 
   else xPlot4a = "0" ;

If iShExitTrigger2
   then xPlot4a = xPlot4a + "1" 
   else xPlot4a = xPlot4a + "0" ;

If iShExitTrigger3
   then xPlot4a = xPlot4a + "1" 
   else xPlot4a = xPlot4a + "0" ;

If iShExitTrigger4
   then xPlot4a = xPlot4a + "1" 
   else xPlot4a = xPlot4a + "0" ;

If iShExitTrigger5
   then xPlot4a = xPlot4a + "1" 
   else xPlot4a = xPlot4a + "0" ;

If iShExitTrigger6
   then xPlot4a = xPlot4a + "1" 
   else xPlot4a = xPlot4a + "0" ;

If iShExitTrigger7
   then xPlot4a = xPlot4a + "1" 
   else xPlot4a = xPlot4a + "0" ;

If iShExitTrigger8
   then xPlot4a = xPlot4a + "1" 
   else xPlot4a = xPlot4a + "0" ;

Plot1( xPlot1a , "LgEntry", fg1 ) ;
SetPlotBGColor( 1, bg1);

Plot2( xPlot2a , "LgExit", fg2 ) ;
SetPlotBGColor( 2, bg2);

Plot3( xPlot3a , "ShEntry", fg3 ) ;
SetPlotBGColor( 3, bg3);

Plot4( xPlot4a , "ShExit", fg4 ) ;
SetPlotBGColor( 4, bg4);
{
end

else begin

Plot1( xPlot1 , "LgEntry", fg1 ) ;

Plot2( xPlot2 , "LgExit", fg2 ) ;

Plot3( 0 - xPlot3 , "ShEntry", fg3 ) ;

Plot4( 0 - xPlot4 , "ShExit", fg4 ) ;
}
end; // if iRadar
Attachments
TRO_EVALUATOR.ELD
(18.95 KiB) Downloaded 591 times

User avatar
TheRumpledOne
rank: 10000+ posts
rank: 10000+ posts
Posts: 15544
Joined: Sun May 14, 2006 9:31 pm
Reputation: 3035
Location: Oregon
Real name: Avery T. Horton, Jr.
Gender: None specified
Contact:

Postby TheRumpledOne » Fri Jun 30, 2006 6:55 am

I see some of you traders download the indicator...

Any comments?

Having fun with it?
IT'S NOT WHAT YOU TRADE, IT'S HOW YOU TRADE IT!

Please do NOT PM me with trading or coding questions, post them in a thread.

rrobin
rank: 50+ posts
rank: 50+ posts
Posts: 112
Joined: Fri May 19, 2006 11:09 am
Reputation: 0
Location: Cedar Creek Lake, Texas
Gender: Male

Postby rrobin » Fri Jun 30, 2006 6:13 pm

This one is $fun.

I changed the colors and the style weight so my old eyes could function.

Played with AAPL on a 10 minute chart with a 60 minute compass.

When you get 3 or 4 signal good things happen.

Thank for all your ideas and help.

rr

Please add www.kreslik.com to your ad blocker white list.
Thank you for your support.

User avatar
TheRumpledOne
rank: 10000+ posts
rank: 10000+ posts
Posts: 15544
Joined: Sun May 14, 2006 9:31 pm
Reputation: 3035
Location: Oregon
Real name: Avery T. Horton, Jr.
Gender: None specified
Contact:

Postby TheRumpledOne » Fri Jun 30, 2006 7:18 pm

rrobin, what triggers did you use?
IT'S NOT WHAT YOU TRADE, IT'S HOW YOU TRADE IT!



Please do NOT PM me with trading or coding questions, post them in a thread.

User avatar
TheRumpledOne
rank: 10000+ posts
rank: 10000+ posts
Posts: 15544
Joined: Sun May 14, 2006 9:31 pm
Reputation: 3035
Location: Oregon
Real name: Avery T. Horton, Jr.
Gender: None specified
Contact:

Postby TheRumpledOne » Mon Jul 03, 2006 4:53 pm

OPINION'S WANTED





I changed the exits from histograms to lines because sometimes you can't see the exit AND entry.

Which way do you prefer?

Just curious.

User avatar
eudamonia
rank: 500+ posts
rank: 500+ posts
Posts: 536
Joined: Thu Jun 15, 2006 9:50 pm
Reputation: 0
Location: Rocklin, CA
Real name: Edward Heming
Gender: Male
Contact:

Postby eudamonia » Mon Jul 03, 2006 5:20 pm

TRO,

Yes this looks cleaner. Please post the revised version if you would. Thanks.

Edward
Eudaimonia (pron.: you-die-moan-e-a) (Greek: εὐδαιμονία) is a classical Greek word commonly translated as 'happiness'. The less subjective "human flourishing" is often preferred as a translation.

User avatar
TheRumpledOne
rank: 10000+ posts
rank: 10000+ posts
Posts: 15544
Joined: Sun May 14, 2006 9:31 pm
Reputation: 3035
Location: Oregon
Real name: Avery T. Horton, Jr.
Gender: None specified
Contact:

Postby TheRumpledOne » Mon Jul 03, 2006 6:48 pm

lol.. no revision... just right click on the indicator and format the style from histogram to lines for the exit triggers.
IT'S NOT WHAT YOU TRADE, IT'S HOW YOU TRADE IT!



Please do NOT PM me with trading or coding questions, post them in a thread.

aracari
rank: <50 posts
rank: <50 posts
Posts: 5
Joined: Fri May 19, 2006 12:40 am
Reputation: 0
Location: New Hampshire
Real name: Dave
Gender: Male
Contact:

Postby aracari » Mon Jul 03, 2006 7:00 pm

Great work on this. I have not used this yet, but the concept seems similar to the Data Mining Indicators and ShowMe that I got on the TS website. The indicator does what you have coded and the Showme prints a signal on the chart and then the commentary window will show the average win rate, average percentage win and summary percentage win for up to 15 bars. I have used this quite a bit in looking for setups. I'll work on a screen shot and post it.

Sorry for the delay. My Office cable connection died. Did this from home.

This image shows a Showme on the chart that labels every time the condition is correct.

The commentary window is to the left and shows the average % change, summary % change and win %. These figures are based on the number of bars out from the condition.

In this case the condition is : Close Crosses Above PrevDayMid and close > jtHMA(close, 21); It uses the middle code written by TRO.

Last edited by aracari on Mon Jul 03, 2006 8:35 pm, edited 2 times in total.

Please add www.kreslik.com to your ad blocker white list.
Thank you for your support.


Return to “Tradestation indicators”