Tracer Universal

Moderator: moderators

LuciferNilsen
rank: <50 posts
rank: <50 posts
Posts: 4
Joined: Mon May 06, 2019 10:46 am
Reputation: 0
Gender: None specified

Tracer Universal

Postby LuciferNilsen » Mon May 06, 2019 10:58 am

HI ALL ! :smt006
1000 dollars per 2-3 hours is not a myth!

briefly about the topic: ADAPTS to the TREND at the time of his STUDIES on his own story. MARTIN-GEIL IN THIS EA NO! - ONE NAMED VARIABLE "MG_Engine" CONTROLS THE LOCK MODE ORDERS! [-X :oops:

If you think about it, how does a trading system or strategy and who prevents you to trade continuously, not just any session or there in the morning with 8 to 10 who imposes on you these restrictions? How can I "take all movement" with the Forex market?

Any trading system or strategy is a result of market surveillance: examines the history and on the basis of this choice trading engine (defined by the foot, offset, profits, market entry condition, etc.). My project allows coming up with a trade strategy for 2-12 hours.

the essence of the project in the following:
1-recorded history (2-3), 2-chased by the tester (half day), 3-put up on trades (2 days) total to double-triple the deposit you only need 1-2 of the week
fears: profit closed, but the market stayed open orders with negative profit
exit 1: overstay minus and wait until the robot itself does not close them for profit (tested on own account is a maximum 1-2 of the week)
Exit 2: close the what to eat with a minus, citing the fact that the total profit loss more
question: could your overstay minus?
answer: Yes, because two days of constant earnings

And all of this becomes possible only in the case of compliance with the rules that are specified in the test instructions or I'll give you a quote:
rule 1: leverage more 100
rule 2: digits after the point: ANY (just change: MINIMAL LAG FOR GAP=5, MINIMAL LAG FOR STATIC GAP=7)
rule 3: do not run other trades on the current account until the Origin expiration date (2 days)
rule 4: after the tester that "ORIGIN is ready", it will be necessary to run the tracer with the found parameters in the #PROFESSIONAL MODE=1 and only after 6-10 consecutive successful launches Tester, you can use ready Origin-files for trading on your account

Note: If the 6-10 consecutive successful launches have failed to achieve, while in mode #PROFESSIONAL MODE = 1, mark the following variables step their future changes from minus, then specify the #PROFESSIONAL parameter MODE value 0 and wait until the tester finds profits by picking up the following parameters:
++MAXIMUM OF ORDERS, ++LOT SIZE IN PERCENT, _MG DEPTH, _TRAILING STOP, _TRAILING STOP FIRST, ++WAITING TIME IN SECONDS,
++TRAILING SPREAD, ++TRAILING PIPS [1...>], ++MIN TPS, ++MAX TPS, ++CRUSER LOT INCREASE, ++(PRC)CANDLE WAITING
Note: parameter ++ CRUSER LOT INCREASE this value can range from-0.01 to-0.5 on your discretion for the remaining options, step value can vary from -1 to-200 at your discretion.

question: How do we know that everything happens the way it should?
answer: the "experts" tab after you exit the #PROFESSIONAL MODE you should see the message:
"additional instructions are found at the stage exit <#PROFESSIONAL> mode" - If so, then you must exit from tracer (software freak), i.e. Enter "-9999" in the variable "__refresh_now" and then restart the Tracer_SN.ex4 in the autocontinue mode, provided that the value "PROFESSIONAL MODE [0/1]=0" from file CONFIG_SN.txt (otherwise, it will be necessary to equate to zero before the next launch of the tester).
question: what will happen if you do not perform "software freak"?
answer: the tester will not be able to find a profit (I remember a similar case with the USDZAR currency)
question: what if the tester will not find anything anyway?
answer: get another currency because current (problematic) pair need time to update history for the next attempt (this is approximately 1-2 days)

As it happens or how does my project?

Before you begin (to Tester, this does not apply) to write to the folder: "C:\ Program Files (x86) \ your broker \ MQL4 \ Libraries \" <== kernel32.dll-file (you can find it here: "C:\ Windows \ System32 \")


My project consists of 3-x programs:
First, it's "Exporter_SN.ex4"-a trading robot (exporter) that runs in the trading terminal (put a tick "Import DLL"), which will trade, account type is any, leverage: 200. The name of the expert ("Exporter_SN.ex4"), the author advises to change for any other reason: broker parses name expert, running in the trading terminal and sometimes goes as follows: disconnect from the server modem hangs, restarts the computer etc.). This expert in the terminal when it starts looking for file "q_result_SYM.lag" and if it finds it, it displays the contents of all variables in the "experts"-folder and then throughout the lengthy work analyzes price fluctuations and when need to send trade team to trade the robot "Receiver_SN.ex4" through the working folder "C:\q_Signals" or via global variables (F3) and (simultaneously with market analysis) writes the current time and price fluctuations in the files: SYM.ASK, SYM.BID, SYM.DAT. SYM.ASK and SYM.BID - is the price values with each tick, SYM.DAT - is the local value (/server) time for the respective prices of that moment. If this robot removed from the trading terminal, and then after 10 minutes to run again, he would continue to write current time and price value by adding them to the end of the above files, and on this site in the files SYM.ASK, SYM.BID, SYM.DAT is formed GAP (in translation from English-"hole"), meaning an unexpected change in prices on a few items, as well as a temporary jump in the amount of 600 seconds (10 minutes) - to deal with this problem, in the file "CONFIG_SN.txt" there are 4 responsible for setting the number of detected gaps at the start of the tester, that fall into the "no trading area list" -an array with the labels, before which no Tester creates new market orders within a certain time specified in the parameter "GAP PRE STOP IN HOURS [0.1...1]=0.1" from file "CONFIG_SN.txt" but the ban will be imposed on the closure orders;


The second program is a trading robot "Receiver_SN.ex4"-with regard to the title, the rules are exactly the same as in the case of "Exporter_SN.ex4". Runs the trading robot in the same trading terminal "Exporter_SN.ex4" on the same currency pair in a separate tab (window) for this to work correctly, the robot need to booth Origin-files in the \files folder: "q_result_SYM.lag" and "q_CRAZY_SYM.lag". About the first Origin-file "q_result_SYM.lag" you already know from the text above, but the second is a follow-up to the first and contains variables that are not included in the first file;
P.S.: also put Daw "DLL imports" because creating swap-files in the course of trade


The third program is the tick history tester "Tracer_SN.ex4" which makes no sense to rename and that you should run only in the old terminal (installation version), but if you compile and run it in the new terminal, on the stage of its work, there will be some deviation from the proper (normal) work. For the normal running of the tester requires a file "tracer_SN.dmp" under the \files folder, which you can get (/Decree) by running the tester in your trading terminal (where you trade) at the moment of connection to the server at work day Forex market interesting note: currency pair tick history files you do not need and recompile under your trading terminal is not required-missing the usual start of the tester on the chosen currency pair, then comes analysis of spread and first created (complemented by new values on the current instrument) the file "tracer_SN.dmp" which (of course, after repeated run "Tracer_SN.ex4" on the selected instruments) must be overwrite the old terminal in the folder \ files where your tester. Also for the normal running of the tester, which only works correctly in older versions of the trading terminal MT4, there must be a tick history file (1.5 days minimum): SYM.ASK, SYM.BID, SYM.DAT mentioned above and that should be written into the folder "C:\Program Files (x86) \GrandCapital Trader 4\experts\files\Recorder". The only bad moment in this situation is the lack of Automation when running the tester-this folder ("Recorder") will have to create their own hands once for the normal operation of the tester. After the first launch of the tester (if you have the file "tracer_SN.dmp" and if there are any files in the folder \files\Recorder), the tester will report no two configuration files that it creates the same with default values. All you have to do is open the configuration file "CONFIG_SN.txt" from the folder \files and set the value of the parameter "START DEPO REAL=" is equivalent to the balance of your account (must be above больше START DEPOSIT VIRTUAL), and then restart the tester and wait for the results to be displayed in the "experts" (as well as the details displayed in the file "res_SYM.txt"). With each new finding profits, Tester will automatically update two Origin-files. Learn about the willingness of two Origin-files can be in the moment of occurrence of the "experts" message: "Attention: ORIGIN is ready !" or listen through the speakers same voice message.

After the advent of "final" Origin-files (meaning 2 file, described above), you should test them in Tester mode "Professional"-you can do this by entering "1" variable "#PROFESSIONAL MODE" after pressing F3, with the "__refresh_now = 1" either by restarting the tester with one modified value in the file "CONFIG_SN.txt": PROFESSIONAL MODE [0/1]=1

P.S.: If the tester to run in this mode, the notice before you start deleting previous values: "F3", "Ctrl+A", "Del", "Esc". After starting the tester in the above mode, you will need to see the screen in the "experts" next post: "the ORIGIN for the current Symbol was successfully loaded in static variables (F3)" You must then press the "F3" and change the option "#MAXIMAL DROPDOWN PERCENT" on the maximum allowable (for example 20-35) then the tester can be run using the input value "1" in the variable "__refresh_now" The Origin-file is considered profitable, when consecutive successful launches 6-10 tester with identical values.

If 6-10 successful launches in a row failed to reach, these parameters should be abandoned and either hands change (customized) parameters in the hope of finding a stable profit, either press "F3" and noted doubtful variables negative step their future changes, then assign a value "0" to the parameter "#PROFESSIONAL MODE" and wait until the tester finds profit fingering selected settings.

P.S.: under the "doubtful (dubious)" variables meaning the following variables: ++MAXIMUM OF ORDERS, ++LOT SIZE IN PERCENT, _MG DEPTH, _TRAILING STOP, _TRAILING STOP FIRST, ++WAITING TIME IN SECONDS, ++TRAILING SPREAD, ++TRAILING PIPS [1...>], ++MIN TPS, ++MAX TPS, ++CRUSER LOT INCREASE, ++(PRC)CANDLE WAITING

By the way, if you do not approve the direct fixation of profit and allowing gradual building of the desired variables in the profitable combination, then you should enter "-33" to the variable "__refresh_now" - do you need it after you read tab "experts" next post: "additional instructions are found at the stage exit <#PROFESSIONAL> mode", etc. (so, when to start iterating over the selected variables).

If you have renounced the busting of variables in the same way as previously described, you can perform the following items:
1. Change the currency pair (Symbol) because of the absence of profit on it at the moment;
2. Update historical files for Tester because fresh synchronization history - this is done by using the turn off the robot "Exporter_SN.ex4" in the pair that will iterate through the tester, because access historical files for copy in other directories. Update history occurs by copying historical files (3 PCs.) in tracer directories containing history files in the disabled state of the robot (see above). By default, the directory containing the historical files is located in the following path: "C:\Program Files (x86)\GrandCapital Trader 4\experts\files\Recorder\";
3. Restart the tester with a drawdown (#MAXIMAL DROPDOWN PERCENT) equal to 1-10% in adaptive search profits (USE SAFE BAND DEFINED BY-DEFAULT [0-Disabled, 1/2/3]=1);
4. Before starting you should remove all files in the folder "C:\Program Files (x86)\GrandCapital Trader 4\experts\files\" except "tracer_SN.dmp" and two configuration files with the extension *.txt;
P.S.: do not forget to activate the robot "Exporter_SN.ex4" after the rewriting files

can also use the Goldzilla principle: - just change (update) history files to Tester, which was launched in additional mode instructions, not forgetting after the upgrade the history, reset also found profits: Enter "0" in the "START DEPOSIT VIRTUAL", then enter "-3333" in "__refresh_now"

Conclusion: If you find a stable (/persistent) options in the mode of "PROFESSIONAL MODE [0/1]=1", you can only update the Origin-files. You can do this through the introduction of the "-8888" "#INTERLACING"-variable

P.S.: "Professional" mode the difference output profit affected by the following variables (the bigger they are, the bigger the difference):

PRE OPEN TICKS DELAY [0-Disabled, 1...>]=1 - the minimum number of missed ticks before you create orders
0-without actually delays (i.e. open orders without delay "instant execution = 1")

OPEN TICKS DELAY [1...>]=4 - random number from 1 to 4, which is added to the minimum number of ticks

PRE CLOSE TICKS DELAY [0-Disabled, 1...>]=2 - the minimum number of missed ticks before closing orders
0-without actually delays (i.e. open orders without delay "instant execution = 1")

CLOSE TICKS DELAY [1...>]=6 - random number from 1 to 6, which is added to the minimum number of ticks

After the advent of "final" Origin-files (file 2 described above), you have to rewrite them in the \files\ folder of your trading terminal (where you Trade). Of course, it will be necessary to restart the booth robots on the respective pairs, which include new Origin-files. To do this, you can restart the robot, confirm restart and allow DLL imports.
P.S.: Origin-file ensures profitable trading only on the following 2 days from the moment of its creation (not counting the two weekends off the Forex market), and if active mode "CRAZY TRADE MODE [0/1]=1" then begin trading is necessary only if the price is roughly in the middle of the channel

You should also know that before running the robot Receiver_SN for the trades in your account (demo or real doesn't matter) in the trading terminal you have to press "F3" and remove from the tester received the remaining variables (for any reason) from the previous launch, it also refers to the file "SYM.BAL", which is located here: "C:\q_Signals\" - it should be removed when you change the Origin-file.

P.S.: the author requests not to run a trading robot Receiver_SN.ex4 for trading on another another symbol, provided that the account is open market orders with large negative profit. Or in other words: If the account has a big minus in open orders, the author advises to run the robot on another symbol of this account.

If the Bill is a big minus in open orders, the author forbids launching robot on another Symbol on this account.

Golden rule:
1. If the lot size current Symbol more 100 and the size of the account balance is not greater than the specified in the parameters of the tester (START DEPOSIT REAL), then you will need to stop to trades on all other Symbols of this account to avoid loss of deposit;
2. If leverage is changed and record ticks continues, then you need to get rid of old history - delete history files from the previous leverage (/account) (before removing temporarily disable the robot "Exporter_SN") and start to record tics anew
3. If a trading robot "RECEIVER_SN.ex4" earned a profit and the price suddenly acquired an unprofitable direction When a large value of "777_____SYM____MAX LOSS IN DEPOSIT [1...>]", there is a possibility of manual closing loss-making orders because of the lack of willingness to spend great time trader on their waiting to enter into profit - trading robot now supports manual closing orders-he even notifies you in the "experts"-folder

Question: - Question:-why both trading robot should work on one trading account?
Answer: - it is done for the plausibility of the trades (we trade out there-where the record price fluctuations and time-notice about the spread, because the fact is that the various accounts he is different!)

How can you ensure that trading robot Receiver_SN.ex4 launched and trades for you? - You must perform the following steps: press the F3 and enter "1" in the special variable "____SYM____SHOW_ME_BALANCE (1-Yes 0-No/)" - during normal operation the robot you will get a report on your screen.


P.S.: it is possible to run multiple bots on a single instrument with different Origin-files. In order to use this feature, you must modify the parameter "MAGIC_NUMBER" (make it greater than zero) for two robots (for Master and Slave), as well as when you run the Master (Exporter_SN.ex4) to change the mode for it to "MWORK=1" (instead of set default "MWORK=2"). Of course, before you run the two above robots, need to replace the two Origin-files. This design will work until the next restart of the trading terminal, which you need to re do the above procedure, namely:
1. return to the place of the old Origin-files (prior to overwriting them, see above)
2. restart the Master (robot Exporter_SN.ex4) with "default"-values
3. restart the Slave (robot Receiver_SN.ex4) with "default"-values
4. replace the 2 Origin-files
5. follow the instructions indicated in the paragraph (after "P.S.:")


P.S.: to the trading system has a video recorded by the author, but at the moment there are some changes between the old video and the current project because there were significant changes made and the author recommends watch this video exclusively because one moment: how to collect data from your trading terminal (i.e. the first create a file "tracer_SN.dmp"), the video is available on the following link: "https://youtu.be/A9p9RxFYHOQ"


P.S.: about the history files.
History files (SYM.ASK, SYM.BID, SYM.DAT) increase with the passage of time and the tester when you run begins to spend a lot of time load them into arrays and various checks. In order to get rid of excess (old) history was written by "Cutter_SN.mq4". Before compiling and running the old Tester need to expose your hands the following variables:
int StaticDataAlligment_in_Hours = 200; - how much fresh history needs to leave
int Digits_now=3; - JPY = 3 (on 5-Digits), JPY = 2 (on 4-Digits), other SYM = 5 (on 5-Digits) or other SYM = 4 (on 4-Digits)
- will not be too lazy and find the exact number of digits after the decimal point in the trading terminal for current couples. After the launch of "Cutter_SN.ex4" on the selected symbol, clipped the story will be located in the following folder: "C:\Program Files (x86)\GrandCapital Trader 4\experts\files\OUT\" and it needs to be rewritten (with replacement) in the folder "C:\Program Files (x86) \GrandCapital Trader 4\experts\files\Recorder\", where running your Tester and to the folder "C:\Program Files (x86)\Vash_Broker\MQL4\Files\" where is your trading terminal (but tentatively {i.e. before writing} you will have to remove from the chart of the robot "Exporter_SN" in the pair, which was subjected to cuts, directly rewrite historical files {3 PCs.} and restart the robot, which continue to record fresh story by add it to the end of the historical files).

And now in simple words about the system: this is a "Sniper" with the latest additions and strategies from him (not to be confused with the three modes) is actually two:

One: it is precisely to create order and receive profit from it in the market ("MG Engine" and "CRAZY TRADE MODE" will be disabled)

Second: determine the Middle corridor, and when the price of a suit there, activate the trade ("MG Engine" and "CRAZY TRADE MODE" will be enabled) -at this point, the robot will make a profit simply because of the price movement in any direction.
Note: in this strategy, a trader must bear in mind what will continually be observed sediment
(a big loss in open orders), which dissolved only after checking prices back.
This strategy can be compared to the earth-moving machine that infiltrates the ground with front to back or with Keith-fish, who decided to have lunch after the walk


P.S.: there's another new name for this system (with the included modes "CRAZY TRADE MODE" and "MG Engine"): "Carrier"

What carry passengers: - the answer to this question is directly proportional to your initial deposit (account balance):

machine: 100
micro bus: 500
bus: 1000
subway: 10000
airliner: 25000
train: 50000
sea cruiser: 100000

P.S.: there are times when the trade account balance increases and as a result, you automatically get a new transport

for the full trading robot (or automatic trading system), you must first gain the maximum number of passengers that means creating some lucrative orders, and if free margin ends, then it means only one: can you go. Before transport are different nuances:
1. passenger changed his mind to go
2. destination suddenly changed

either of the two above options means only one thing: we have to release the passengers, paying him a penalty, that the language of the Forex market means to close an unprofitable warrant returned yourself mortgage funds (increase the free margin), and only after all the capricious passengers will be issued in payment of them penalties, we can recruit the "right" instead of them passengers and hit the road.

At the end of the path have to chauffeur passengers transport calculation that depends on the mass of the passengers (lot) and the length of the path (pips). And so it goes on continuously until the market does not go away in 2 days a week.


P.S.: there's another new name for this system (subject to the inclusion of modes "CRAZY TRADE MODE" and "MG Engine"): "Baker"
To start the define symbols:
iron sheet for baking - account balance
dough - just open market order
cookies - profit order

- Tester automatically determines condition correct trade and a minimum level of free margin, which has allowed to bake in a mold, which may not be all 100% full (otherwise executed Orange stripe).


Question: - How do I make a profit on the warrants mentioned through the speakers?
Answer: - compile "SpeechEngine.mq4" and run in the same terminal, where Receiver_SN.ex4 in a new window any Symbol (sound files (project's Sound's) must be in place)

Question: - How do I get the tester voiced found profits through the speakers?
Answer: - overwrite the audio files to the project in the folder \SOUNDS of the old trading terminal, where the tester, press "F3" and enter "-22" in to variable "__refresh_now"


Questions and answers: :shock:
1. question: - I run a Receiver_SN.ex4 and in the "Experts" it is written: "Connection denied ..." ("no connection ..."), what to do?
answer: - hands create in the folder "C:\q_Signals" the file "alo.txt" and try again

2. question: - Receiver_SN.ex4 does not trade for a long time, what could be wrong?
answer: - trading robot Exporter_SN.ex4: try to restart it-if after restarting again doesn't sell, then move on to a new parameter "TRANCEFER=0", which is already installed (=0) when running both robots in one terminal at different tabs of the same symbol. This option means that the trading signals from Exporter_SN.ex4 to Receiver_SN.ex4 is going through global static variables (F3). When such trade trader need only one terminal with two identical tabs (if the "file is ready)

3. question: - both the robot were launched with parameter "TRANCEFER=0", but Receiver_SN.ex4 still doesn't sell, what else could it be?
answer: - try restarting both robots in mode "TRANCEFER=1", "DLL imports" checkbox then compile mini robot "STARTER.mq4" and run it on a separate tab with the correct Symbol (the robot through "kernel32.dll" creates one "BUY" order if it is not already there)

4. question: - It seems to me that a trading robot "Receiver_SN.ex4" is not working correctly, what could it be?
answer: - check the message at the start of this robot, which should be said, that he:
"This version v.3.11 SN (Receiver) has been tested successfully on a paid account", otherwise, you have the wrong trading account on which registered a trading robot
- at compile time the error occurred, try to compile this robot in the trading terminal "Boston Merchant Capital" (see above)

5. question: - Tester a long running and finds almost nothing, what could it be?
answer: - Increase virtual Depot in 1.5-2 times is the parameter "START DEPOSIT VIRTUAL", which is in the file CONFIG_SN.txt (restart)
question: - How can I determine what the tester is halted?
answer: - Press "F3" and enter something in the parameter "__refresh_now", for example "-3333", and if the response does not succeed, then the tester actually halted and want to close the terminal running the tester in it. Otherwise, the "experts" tab displays the current profit tester.

6. question: - on the first day, after you create a Origin-file, trading robot "Receiver_SN.ex4" made a profit, but in the following days started to gradually merge the deposit that can be?
answer: - Origin-file guarantees its profitable trading only on the following 2 days of trading, after which we'll have to update it. Update - this means rerun on fresh Tester (/updated) history (that is: SYM.ASK, SYM.BID, SYM.DAT), which will have to rewrite the folder of the old trading terminal "\files\Recorder" with the replacement of the existing files with newer.

7. question: - What if I doubt the correctness of the trading operations of this robot, as I look at it step-by-step work?
answer: - start tracking system Tester-enter "-1000000" (1 and 6 zeros) in the variable "__refresh_now", wait for the tracking and open the file "LOGOS_SYM.txt" for detailed acquaintance with the work of the tester
P.S.: this file will be here: "C:\Program Files (x86)\GrandCapital Trader 4\experts\files"

8. question: - additional instructions-mode Tester does not find any profits that might be?
answer: - restart the tester in the mode of "PROFESSIONAL MODE [0/1]=0" and let the tester to continue its work using the autocontinue.


P.S.: If you have a fast CPU or super computers, then this is the project that you. Also do not forget that the tester Tracer_SN.ex4 can be started only once in one trading terminal (Terminal.exe), and if you want to analyze multiple symbols, then you need to copy the folder with the trading terminal, and only run the tester on another symbol (the number of cores is directly proportional to the maximum possible simultaneous launches Tester).


Full Project you can download from here (a new instruction in the archive):
Load link: h t t p s : / / t u s f i l e s . c o m /9d4svfs8jzoi
(please remove the "space" symbol from upper link)

My Trade Statement you can download from here:
Load link: h t t p s : / / t u s f i l e s . c o m /ehzfe0bqx69h
(please remove the "space" symbol from upper link)

my Demo account: 2090270826
investor password: hrNMM2ffQ9
Trading server: https://tickmill.com

P.S.: also able to emulate the Orange stripe, Goldzilla Principle and Golden rule and other... - read full manual please! :smt117

to buy from the author of this project, please contact E-Mail: Lucifernilsen "a dog" y a h o o . c o m (in the subject line write: "ROBOT" or "DEMO")

project cost: 100 $

I attach a historical files (Currency.ASK, Currency.BID, Currency.DAT) for EURUSD and USDZAR + tracer_SN.dmp to ensure that the trader was able to work out on Tester:
Load link: h t t p s : / / t u s f i l e s . c o m /lonspth9eff2
(please remove the "space" symbol from upper link)

NOTE: "SYM" - it's Currency

Image
Last edited by LuciferNilsen on Tue Jun 04, 2019 10:36 pm, edited 33 times in total.

Please add www.kreslik.com to your ad blocker white list.
Thank you for your support.

User avatar
IgazI
rank: 150+ posts
rank: 150+ posts
Posts: 204
Joined: Sat Feb 17, 2018 5:28 pm
Reputation: 218
Gender: None specified

Re: Tracer Universal

Postby IgazI » Mon May 06, 2019 2:52 pm

If you are going to post a massive wall of text then may I suggest that you either break it up into several posts or use the 'code' button to make it more readable:

//TITLE HERE//

Code: Select all

from the author: Me, unfortunately, was found a way to destroy the broker!

If you think about it, how does a trading system or strategy and who prevents you to trade continuously, not just any session or there in
the morning with 8 to 10 who imposes on you these restrictions? How can I "take all movement" with the Forex market?
I helped write about aliens this tester with robots.


Any trading system or strategy is a result of market surveillance: examines the history and on the basis of this choice trading algorithm
(defined by the foot, offset, profits, market entry condition, etc.). My project allows coming up with a trade strategy
for 12:00 am (maximum)-and at least 2:00.
As it happens or how does my project?


Before you begin (to Tester, this does not apply) to write to the folder: "C:\ Program Files (x86) \ your broker \ MQL4 \ Libraries \"
file "kernel32.dll" (you can find it here: "C:\ Windows \ System32 \")


My project consists of 3-x programs:
First, it's "Exporter_SN.ex4"-a trading robot (exporter) that runs in the trading terminal (put a tick "Import DLL"), which will trade,
account type is any, leverage: 200. The name of the expert ("Exporter_SN.ex4"), the author advises to change for any other reason:
broker parses name expert, running in the trading terminal and sometimes goes as follows:
disconnect from the server modem hangs, restarts the computer etc.).
This expert in the terminal when it starts looking for file "q_result_SYM.lag" and if it finds it, it displays the contents of all variables
in the "experts"-folder and then throughout the lengthy work analyzes price fluctuations and when need to send trade team to trade the robot
"Receiver_SN.ex4" through the working folder "C:\q_Signals" or via global variables (F3) and (simultaneously with market analysis) writes the
current time and price fluctuations in the files: SYM.ASK, SYM.BID, SYM.DAT.
SYM.ASK and SYM.BID - is the price values with each tick, SYM.DAT - is the local value (/server) time for the respective prices of that
moment. If this robot removed from the trading terminal, and then after 10 minutes to run again, he would continue to write current time and
price value by adding them to the end of the above files, and on this site in the files SYM.ASK, SYM.BID, SYM.DAT is formed GAP
(in translation from English-"hole"), meaning an unexpected change in prices on a few items, as well as a temporary jump in the amount of
600 seconds (10 minutes) - to deal with this problem, in the file "CONFIG_SN.txt" there are 4 responsible for setting the number of detected
gaps at the start of the tester, that fall into the "no trading area list" -an array with the labels, before which no Tester creates new
market orders within a certain time specified in the parameter "GAP PRE STOP IN HOURS [0.1...1]=0.1" from file "CONFIG_SN.txt" but the ban
will be imposed on the closure orders;


The second program is a trading robot "Receiver_SN.ex4"-with regard to the title, the rules are exactly the same as in the case of
"Exporter_SN.ex4". Runs the trading robot in the same trading terminal "Exporter_SN.ex4" on the same currency pair in a separate tab (window)
for this to work correctly, the robot need to booth Origin-files in the \files folder: "q_result_SYM.lag" and "q_CRAZY_SYM.lag".
About the first Origin-file "q_result_SYM.lag" you already know from the text above, but the second is a follow-up to the first and
contains variables that are not included in the first file;
P.S.: also put Daw "DLL imports" because creating swap-files in the course of trade


The third program is the tick history tester "Tracer_SN.ex4" which makes no sense to rename and that you should run only in the old terminal
(installation version), but if you compile and run it in the new terminal, on the stage of its work, there will be some deviation from the
proper (normal) work. For the normal running of the tester requires a file "tracer_SN.dmp" under the \files folder, which you can get
(/Decree) by running the tester in your trading terminal (where you trade) at the moment of connection to the server at work day Forex market
interesting note: currency pair tick history files you do not need and recompile under your trading terminal is not required-missing the
usual start of the tester on the chosen currency pair, then comes analysis of spread and first created (complemented by new values on the
current instrument) the file "tracer_SN.dmp" which (of course, after repeated run "Tracer_SN.ex4" on the selected instruments) must be
overwrite the old terminal in the folder \ files where your tester. Also for the normal running of the tester, which only works correctly in
older versions of the trading terminal MT4, there must be a tick history file (1.5 days minimum): SYM.Ask, SYM.BID, SYM.DAT mentioned above
and that should be written into the folder "C:\Program Files (x86) \GrandCapital Trader 4\experts\files\Recorder". The only bad moment in
this situation is the lack of Automation when running the tester-this folder ("Recorder") will have to create their own hands once for the
normal operation of the tester. After the first launch of the tester (if you have the file "tracer_SN.dmp" and if there are any files in the
folder \files\Recorder), the tester will report no two configuration files that it creates the same with default values. All you have to do
is open the configuration file "CONFIG_SN.txt" from the folder \files and set the value of the parameter "START DEPO REAL=" is equivalent to
the balance of your account (must be above больше START DEPOSIT VIRTUAL), and then restart the tester and wait for the results to be
displayed in the "experts" (as well as the details displayed in the file "res_SYM.txt"). With each new finding profits, Tester will
automatically update two Origin-files.
Learn about the willingness of two Origin-files can be in the moment of occurrence of the "experts" message:
"Attention: ORIGIN is ready !" or listen through the speakers voice message: "Attention, Origin-file ready!".

After the advent of "final" Origin-files (meaning 2 file, described above), you should test them in Tester mode "Professional"-you can do
this by entering "1" variable "#PROFESSIONAL MODE" after pressing F3, with the "__refresh_now = 1" either by restarting the tester with one
modified value in the file "CONFIG_SN.txt":
PROFESSIONAL MODE [0/1]=1

P.S.: If the tester to run in this mode, the notice before you start deleting previous values: "F3", "Ctrl+A", "Del", "Esc"
After starting the tester in the above mode, you will need to see the screen in the "experts" next post:
"the ORIGIN for the current Symbol was successfully loaded in static variables (F3)"
You must then press the "F3" and change the option "#MAXIMAL DROPDOWN PERCENT" on the maximum allowable (for example 20-35)
then the tester can be run using the input value "1" in the variable "__refresh_now"
The Origin-file is considered profitable, when consecutive successful launches 6-10 tester with identical values.

If 6-10 successful launches in a row failed to reach, these parameters should be abandoned and either hands change (customized) parameters
in the hope of finding a stable profit, either press "F3" and noted doubtful variables negative step their future changes, then assign a
value "0" to the parameter "#PROFESSIONAL MODE" and wait until the tester finds profit fingering selected settings.

P.S.: under the "doubtful (dubious)" variables meaning the following variables:
++MAXIMUM OF ORDERS, ++LOT SIZE IN PERCENT, _MG DEPTH, _TRAILING STOP, _TRAILING STOP FIRST, ++WAITING TIME IN SECONDS,
++TRAILING STOP SPREAD, ++MINIMAL PROFIT IN PIPS, ++MIN TPS, ++MAX TPS, ++CRUSER LOT INCREASE, ++(PRC)CANDLE WAITING

By the way, if you do not approve the direct fixation of profit and allowing gradual building of the desired variables in the profitable
combination, then you should enter "-33" to the variable "__refresh_now" - do you need it after you read tab "experts" next post:
"additional instructions are found at the stage exit <#PROFESSIONAL> mode", etc. (so, when to start iterating over the selected variables).

If you have renounced the busting of variables in the same way as previously described, you can perform the following items:
1. Change the currency pair (Symbol) because of the absence of profit on it at the moment;
2. Update historical files for Tester because fresh synchronization history - this is done by using the turn off the robot "Exporter_SN.ex4"
in the pair that will iterate through the tester, because access historical files for copy in other directories. Update history occurs by
copying historical files (3 PCs.) in tracer directories containing history files in the disabled state of the robot (see above).
By default, the directory containing the historical files is located in the following path:
"C:\Program Files (x86)\GrandCapital Trader 4\experts\files\Recorder\";
3. Restart the tester with a drawdown (#MAXIMAL DROPDOWN PERCENT) equal to 1-10% in adaptive search profits
(USE SAFE BAND DEFINED BY-DEFAULT [0-Disabled, 1/2/3]=1);
4. Before starting you should remove all files in the folder "C:\Program Files (x86)\GrandCapital Trader 4\experts\files\" except
"tracer_SN.dmp" and two configuration files with the extension *.txt;
P.S.: do not forget to activate the robot "Exporter_SN.ex4" after the rewriting files

can also use the Goldzilla principle: - just change (update) history files to Tester, which was launched in additional mode instructions,
not forgetting after the upgrade the history, reset also found profits:
Enter "0" in the "START DEPOSIT VIRTUAL", then enter "-3333" in "__refresh_now"


Conclusion: If you find a stable (/persistent) options in the mode of "PROFESSIONAL MODE [0/1]=1", you can only update the Origin-files.
You can do this through the introduction of the "-8888" "#INTERLACING"-variable

P.S.: "Professional" mode the difference output profit affected by the following variables (the bigger they are, the bigger the difference):


PRE OPEN TICKS DELAY [0-Disabled, 1...>]=1 - the minimum number of missed ticks before you create orders
0-without actually delays (i.e. open orders without delay "instant execution = 1")

OPEN TICKS DELAY [1...>]=4 - random number from 1 to 4, which is added to the minimum number of ticks

PRE CLOSE TICKS DELAY [0-Disabled, 1...>]=2 - the minimum number of missed ticks before closing orders
0-without actually delays (i.e. open orders without delay "instant execution = 1")

CLOSE TICKS DELAY [1...>]=6 - random number from 1 to 6, which is added to the minimum number of ticks

After the advent of "final" Origin-files (file 2 described above), you have to rewrite them in the \files\ folder of your trading terminal
(where you Trade). Of course, it will be necessary to restart the booth robots on the respective pairs, which include new Origin-files.
To do this, you can restart the robot, confirm restart and allow DLL imports.
P.S.: Origin-file ensures profitable trading only on the following 2 days from the moment of its creation
(not counting the two weekends off the Forex market), and if active mode "CRAZY TRADE MODE [0/1]=1" then begin trading is necessary
only if the price is roughly in the middle of the channel

You should also know that before running the robot Receiver_SN for the trades in your account (demo or real doesn't matter) in the trading
terminal you have to press "F3" and remove from the tester received the remaining variables (for any reason) from the previous launch,
it also refers to the file "SYM.BAL", which is located here: "C:\q_Signals\" - it should be removed when you change the Origin-file.



P.S.: the author requests not to run a trading robot Receiver_SN.ex4 for trading on another another symbol, provided that the account is
open market orders with large negative profit. Or in other words: If the account has a big minus in open orders, the author advises
to run the robot on another symbol of this account.

If the Bill is a big minus in open orders, the author forbids launching robot on another Symbol on this account.

Golden rule: 1. If the lot size current Symbol more 100 and the size of the account balance is not greater than the specified in the
parameters of the tester (START DEPOSIT REAL), then you will need to stop to trades on all other Symbols of this account
to avoid loss of deposit;
2. If leverage is changed and record ticks continues, then you need to get rid of old history - delete history files from the
previous leverage (/account) (before removing temporarily disable the robot "Exporter_SN") and start to record tics anew
3. If a trading robot "RECEIVER_SN.ex4" earned a profit and the price suddenly acquired an unprofitable direction When a
large value of "777_____SYM____MAX LOSS IN DEPOSIT [1...>]", there is a possibility of manual closing loss-making orders
because of the lack of willingness to spend great time trader on their waiting to enter into profit - trading robot now
supports manual closing orders-he even notifies you in the "experts"-folder



Question: - Question:-why both trading robot should work on one trading account?
Answer: - it is done for the plausibility of the trades (we trade out there-where the record price fluctuations and time-notice about the
spread, because the fact is that the various accounts he is different!)

How can you ensure that trading robot Receiver_SN.ex4 launched and trades for you? - You must perform the following steps:
press the F3 and enter "1" in the special variable "____SYM____SHOW_ME_BALANCE (1-Yes 0-No/)" - during normal operation the robot you will
get a report on your screen.


P.S.: it is possible to run multiple bots on a single instrument with different Origin-files. In order to use this feature, you must modify
the parameter "MAGIC_NUMBER" (make it greater than zero) for two robots (for Master and Slave), as well as when you run the Master
(Exporter_SN.ex4) to change the mode for it to "MWORK=1" (instead of set default "MWORK=2"). Of course, before you run the two above
robots, need to replace the two Origin-files. This design will work until the next restart of the trading terminal, which you need to
re do the above procedure, namely:
1. return to the place of the old Origin-files (prior to overwriting them, see above)
2. restart the Master (robot Exporter_SN.ex4) with "default"-values
3. restart the Slave (robot Receiver_SN.ex4) with "default"-values
4. replace the 2 Origin-files
5. follow the instructions indicated in the paragraph (after "P.S.:")



P.S.: to the trading system has a video recorded by the author, but at the moment there are some changes between the old video and the
current project because there were significant changes made and the author recommends watch this video exclusively because one moment:
how to collect data from your trading terminal (i.e. the first create a file "tracer_SN.dmp"), the video is available on the following
link: "https://youtu.be/A9p9RxFYHOQ"


P.S.: about the history files.
History files (SYM.ASK, SYM.BID, SYM.DAT) increase with the passage of time and the tester when you run begins to spend a lot of time
load them into arrays and various checks. In order to get rid of excess (old) history was written by "Cutter_SN.mq4".
Before compiling and running the old Tester need to expose your hands the following variables:
int StaticDataAlligment_in_Hours = 200; - how much fresh history needs to leave
int Digits_now=3; - JPY = 3 (on 5-Digits), JPY = 2 (on 4-Digits), other SYM = 5 (on 5-Digits) or other SYM = 4 (on 4-Digits)
- will not be too lazy and find the exact number of digits after the decimal point in the trading terminal for current couples
After the launch of "Cutter_SN.ex4" on the selected symbol, clipped the story will be located in the following folder:
"C:\Program Files (x86)\GrandCapital Trader 4\experts\files\OUT\"
and it needs to be rewritten (with replacement) in the folder "C:\Program Files (x86) \GrandCapital Trader 4\experts\files\Recorder\",
where running your Tester and to the folder "C:\Program Files (x86)\Vash_Broker\MQL4\Files\" where is your trading terminal
(but tentatively {i.e. before writing} you will have to remove from the chart of the robot "Exporter_SN" in the pair, which was
subjected to cuts, directly rewrite historical files {3 PCs.} and restart the robot, which continue to record fresh story by add it
to the end of the historical files).



And now in simple words about the system:
this is a "Sniper" with the latest additions and strategies from him (not to be confused with the three modes) is actually two:

One: it is precisely to create order and receive profit from it in the market ("MG Engine" and "CRAZY TRADE MODE" will be disabled)

Second: determine the Middle corridor, and when the price of a suit there, activate the trade ("MG Engine" and "CRAZY TRADE MODE" will be
enabled) -at this point, the robot will make a profit simply because of the price movement in any direction.
Note: in this strategy, a trader must bear in mind what will continually be observed sediment
(a big loss in open orders), which dissolved only after checking prices back.
This strategy can be compared to the earth-moving machine that infiltrates the ground with front to back or with Keith-fish,
who decided to have lunch after the walk


P.S.: there's another new name for this system (with the included modes "CRAZY TRADE MODE" and "MG Engine"): "Carrier"

What carry passengers: - the answer to this question is directly proportional to your initial deposit (account balance):

machine: 100
micro bus: 500
bus: 1000
subway: 10000
airliner: 25000
train: 50000
sea cruiser: 100000

P.S.: there are times when the trade account balance increases and as a result, you automatically get a new transport

for the full trading robot (or automatic trading system), you must first gain the maximum number of passengers that means creating some
lucrative orders, and if free margin ends, then it means only one: can you go. Before transport are different nuances:
1. passenger changed his mind to go
2. destination suddenly changed

either of the two above options means only one thing: we have to release the passengers, paying him a penalty, that the language of the Forex
market means to close an unprofitable warrant returned yourself mortgage funds (increase the free margin), and only after all the capricious
passengers will be issued in payment of them penalties, we can recruit the "right" instead of them passengers and hit the road.

At the end of the path have to chauffeur passengers transport calculation that depends on the mass of the passengers (lot) and the length of
the path (pips). And so it goes on continuously until the market does not go away in 2 days a week.


P.S.: there's another new name for this system (subject to the inclusion of modes "CRAZY TRADE MODE" and "MG Engine"): "Baker"
To start the define symbols:
iron sheet for baking - account balance
dough - just open market order
cookies - profit order

- Tester automatically determines condition correct trade and a minimum level of free margin, which has allowed to bake in a mold, which may
not be all 100% full (otherwise executed Orange stripe).


Question: - How do I make a profit on the warrants mentioned through the speakers?
Answer: - compile "SpeechEngine.mq4" and run in the same terminal, where Receiver_SN.ex4 in a new window any Symbol
(sound files (project's Sound's) must be in place)


Question: - How do I get the tester voiced found profits through the speakers?
Answer: - overwrite the audio files to the project in the folder \SOUNDS of the old trading terminal, where the tester, press "F3"
and enter "-22" in to variable "__refresh_now"



Tips for avoiding scams the broker:


1. close firewall access (new rule) on all known exe-files that are visible in the Task Manager but if you use Firefox browser or loaders,
then temporarily enable traffic (reception/transmission) for svchost.exe. And now for more information about how to do this:
go to start/Control Panel/system and security/Windows Firewall/Advanced settings/rules for outgoing/incoming connections-deny access to
all suspicious processes and programs that You can see in Task Manager (the path to the exe-file, you can copy directly from the
Task Manager-Properties/Security)

an exception would amount to processes:
C:\Program Files\Mozilla Firefox\firefox.exe
C:\Windows\System32\svchost.exe - provided that it is not the use of browsers and downloaders
C:\Program Files (x86)\BMFN MetaTrader\terminal.exe - your trading terminal

2. disable the following services:
1. Background Intelligent service (BITS it can gobble up all your Internet traffic for a few minutes)
2. the Windows Update Service (as it is completely disable-please don't be lazy Googling on the Internet)
3. NET Tcp PortS haring Service (and all this block)
4. Microsoft .NET Framework NGEN (and all this block)
5. only nVIDIA services related to upgrading your network
6. Light Scribe Service Direct Disc Labeling Service (that Nero features)

3. After installing fresh operating system (i.e. Windows 7), you must degree from set-up password (DCOM access denied) and install the driver
from the mother, drivers for video cards and antivirus "Advanced System Care Ultimate" (modem driver not yet installed), then you must
reboot and re boot DVD-Live or from a flash drive to gain full access to the hard drive with the operating system installed, then you
should do the following:
1. wherever you permanently delete Internet Explorer (also from folders: Users, ProgramData)
2. Rename moricons.dll in mfplay.dll and replace it wherever you can find only
3. keep in a safe place of Explorer.exe from folder: "C:\Windows\"
4. found ipconfig.exe in the folder "C:\Windows\System32\" and rename it in the following files and their subsequent replacement:
1. iun6002.exe - C:\Windows\
2. UNRecode.exe - C:\Windows\
3. WerFault.exe - C:\Windows\System32\ - everywhere, where you can find
4. dwm.exe - C:\Windows\System32\ - everywhere, where you can find
5. HelpPane.exe - everywhere, where you can find
6. conhost.exe - everywhere, where you can find
7. net.exe - everywhere, where you can find
8. net1.exe - everywhere, where you can find
9. MpCmdRun.exe - C:\Program Files\Windows Defender

4. After the installation or the first run of the trading terminal folder will appear:
"C:\Users\*current user*\AppData\Roaming\MetaQuotes\WebInstall" and to protect against a broker you will need to perform the steps listed
below:
1. investigate all this folder ( taking into account the subdirectories) to detect the files with the extension .PNG and with the
extension .EXE
2. Rename Ipconfig.exe under found EXE-files with subsequent replacement
3. Rename any harmless 7z-archive in PNG files and then replace (actually a PNG file is a ZIP archive)
P.S.: this must be done only when identifying the malfunctioning of the trading terminal (connection failure, freezes, etc.),
otherwise, you do not need to perform this action!

If your trading terminal is halted when you restart of trading robots, you help item 5, as described below:
5. Find London broker "Boston Merchant Financial Ltd" (or "Boston Merchant Capital"), the trading terminal and reinstall it after the
first start of rewrite of this Terminal in new folder two EXE-files:
metaeditor.exe size 10 109 552 bytes; terminal.exe size 11 234 800 bytes;
question: - what to do next with these EXE files?
Answer: - they must be replace in your trading terminal (rewrite your Trading Terminal folder with replacement of existing files)
After that the terminal will not halting when robots restart and change its actual size at + 3 Mb.
PS: While final compilatipon of two robots also recomended use this terminal!

5. The "start" menu, select "Control Panel", click on "performance and maintenance" and then click programs, administrative tools,
open local security policy, expand "local policies", select the audit policy folder and turn off everything you can to ensure that
the Audit was banned!
in my opinion it is auditing policy allows you to remotely shut down your PC.

Questions and answers from U.F.O.:
1. question: - I run a Receiver_SN.ex4 and in the "Experts" it is written: "Connection denied ..." ("no connection ..."), what to do?
answer: - hands create in the folder "C:\q_Signals" the file "alo.txt" and try again
2. question: - Receiver_SN.ex4 does not trade for a long time, what could be wrong?
answer: - trading robot Exporter_SN.ex4: try to restart it-if after restarting again doesn't sell, then move on to a new parameter
"TRANCEFER=0", which is already installed (=0) when running both robots in one terminal at different tabs of the same
symbol. This option means that the trading signals from Exporter_SN.ex4 to Receiver_SN.ex4 is going through global static
variables (F3). When such trade trader need only one terminal with two identical tabs (if the "file is ready)
3. question: - both the robot were launched with parameter "TRANCEFER=0", but Receiver_SN.ex4 still doesn't sell, what else could it be?
answer: - try restarting both robots in mode "TRANCEFER=1", "DLL imports" checkbox then compile mini robot "STARTER.mq4" and run it on
a separate tab with the correct Symbol (the robot through "kernel32.dll" creates one "BUY" order if it is not already there)

4. question: - It seems to me that a trading robot "Receiver_SN.ex4" is not working correctly, what could it be?
answer: - check the message at the start of this robot, which should be said, that he:
"This version v.3.11 SN (Receiver) has been tested successfully on a paid account", otherwise, you have the wrong trading
account on which registered a trading robot
- at compile time the error occurred, try to compile this robot in the trading terminal "Boston Merchant Capital" (see above)

5. question: - Tester a long running and finds almost nothing, what could it be?
answer: - Increase virtual Depot in 1.5-2 times is the parameter "START DEPOSIT VIRTUAL", which is in the file CONFIG_SN.txt (restart)
question: - How can I determine what the tester is halted?
answer: - Press "F3" and enter something in the parameter "__refresh_now", for example "-3333", and if the response does not succeed,
then the tester actually halted and want to close the terminal running the tester in it.
Otherwise, the "experts" tab displays the current profit tester.

6. question: - on the first day, after you create a Origin-file, trading robot "Receiver_SN.ex4" made a profit, but in the following
days started to gradually merge the deposit that can be?
answer: - Origin-file guarantees its profitable trading only on the following 2 days of trading, after which we'll have to update it.
Update - this means rerun on fresh Tester (/updated) history (that is: SYM.ASK, SYM.BID, SYM.DAT), which will have to rewrite
the folder of the old trading terminal "\files\Recorder" with the replacement of the existing files with newer.

7. question: - What if I doubt the correctness of the trading operations of this robot, as I look at it step-by-step work?
answer: - start tracking system Tester-enter "-1000000" (1 and 6 zeros) in the variable "__refresh_now", wait for the tracking
and open the file "LOGOS_SYM.txt" for detailed acquaintance with the work of the tester
P.S.: this file will be here: "C:\Program Files (x86)\GrandCapital Trader 4\experts\files"


P.S.: If you have a fast CPU or super computers, then this is the project that you. Also do not forget that the tester Tracer_SN.ex4 can
be started only once in one trading terminal (Terminal.exe), and if you want to analyze multiple symbols, then you need to copy
the folder with the trading terminal, and only run the tester on another symbol (the number of cores is directly proportional to the
maximum possible simultaneous launches Tester).


TRACER_SN.ex4 you can download from here:
Load link: h t t p s : / / t u s f i l e s . c o m /r7q7ieejnlek
(please remove the "space" symbol from upper link)


and Project Sound you can download from here:
Load link: h t t p s : / / t u s f i l e s . c o m /q0vvzow4s6fi
(please remove the "space" symbol from upper link)


My Trade Statement you can download from here:
Load link: h t t p s : / / t u s f i l e s . c o m /ehzfe0bqx69h
(please remove the "space" symbol from upper link)

or looking to m'y account:
Demo account number 2090270826
Demo account investor password hrNMM2ffQ9
Trading server: https://tickmill.com


to buy from the author of this project, please contact E-Mail: Lucifernilsen@yahoo.com (in the subject line write: "ROBOT")

project cost: USD 100

After the transfer of funds to WMZ purse, you get a trading robot RECEIVER_SN. EX4, which will only work on your trading account

<a href="https://imggmi.com" target="_blank"><img src="https://cdn1.imggmi.com/uploads/2019/5/6/f1fd9d96d26d4a3bea2784d2dac5a334-full.jpg" border="0"/></a>


//PEOPLE CAN SEE ATTACHMENTS HERE & ARE MORE ENCOURAGED TO READ THE MASSIVE WALL OF TEXT//

LuciferNilsen
rank: <50 posts
rank: <50 posts
Posts: 4
Joined: Mon May 06, 2019 10:46 am
Reputation: 0
Gender: None specified

tripling deposit per week in 3 stages

Postby LuciferNilsen » Fri May 24, 2019 9:41 pm

Full Project you can download from here: h t t p s : / / t u s f i l e s . c o m /oy16irt396zn (link is renew at 08.06.2019, pass: pocoloco3 - fixed Tracer) [-X
(please remove the "space" symbol from upper link)

fixed a serious bug in the tester relative overstatement of the maximum number of simultaneously open orders


now not Tester switches to variable "MAXIMUM ORDERS" subject "parameter LOCK activity CHANGE ORDERS [0/1]=1" from file "CONFIG_SN.txt", also by default now active program for finding profit
h t t p s : / / t u s f i l e s . c o m /u15jwso12nsv (link renew at 09.06.2019) :oops:
(please remove the "space" symbol from upper link)

LuciferNilsen
rank: <50 posts
rank: <50 posts
Posts: 4
Joined: Mon May 06, 2019 10:46 am
Reputation: 0
Gender: None specified

SHORT MANUAL

Postby LuciferNilsen » Fri Jun 28, 2019 5:49 pm

-1. copy project sound files to "\sounds\"- folder your trade terminal
0. copy Exporter_SN.ex4 (/ex5) to your trade terminal - to "Experts"-folder
1. copy Tracer_SN.ex4 to your trade terminal - to "Scripts"-folder (for MT4) or copy MAKE_tracer_SN_dmp.mq5 to "Scripts"-folder (for MT5)
2. start history recording on your trade terminal in all interested currency-pair by running Exporter_SN.ex4 (/ex5)
3. creation Tracer_SN.dmp-file from your trade terminal with running Tracer_SN.ex4 (for MT4) or with running MAKE_tracer_SN_dmp.ex5 (for MT5) (make running on non-used and interested currency-pair {i.e. w/o starting EA} chart window - pair by pair - {i.e.: step by step})
3. after 1-2 days recording:
3a. install old trade terminal (Grand Capital - gct4setup.exe) and copy "project sounds"-files in to "\sounds\"- folder your old terminal
3b. copy historical files (ASK,BID,DAT) from "\files"-folder your trade terminal to old trade terminal - in to "\files\Recorder\"-folder (once manual creation this folder i.e.: "Recorder")
(P.S.: before copy, you must remove Exporter_SN.ex4 (/ex5) from launch-chart-window, after copy you must running (/starting)-again Exporter_SN.ex4 (/ex5))
3c. copy Tracer_SN.ex4 to old trade terminal: to "Scripts"-folder
3d. copy Tracer_SN.dmp to old trade terminal: to "\files"-folder
3e. launch old trade terminal
3f. from old trade terminal start the Tracer (i.e.: Tracer_SN.ex4)
3g. open from old trade terminal "\files"-folder "CONFIG_SN.txt"-file and change in to this file "START DEPOSIT REAL=5000"-string (change to your starting deposit)
3h. run again Tracer_SN.ex4 and wait speech-message on russian language: "Origin is ready!"
3i. copy from old trade terminal booth origin-files (i.e.: q_CRAZY_NZDCHF.lag, q_result_NZDCHF.lag) in to your trade terminal to "files"-folder
3j. launch Receiver_SN.ex4 (/ex5) on free chart-window - on Origin's symbol on your trade terminal (before send me e-mail by registered to your trade account)
3k. tested the trade


NEW 01.07.2019 ver. with fixed tracer_SN:
Tester now contains no errors!
Whats new: added new option in CONFIG_SN.txt-file: "FAST PROFIT SEARCH IN ADDITIONAL INSTRUCTIONS MODE [0/1]=1"
-What is it?
-When set to "1", then if the tester found profits "ADDITIONAL INSTRUCTIONS ATTEMPTS SETTING"-times in a row, and then found nothing, then immediately changes the switching point by reason of wasting precious time on an" empty "bust.
-When set to "0"-Tester will iterate through the current variable (/switching point) until the end of the full range of busting
Full Project you can download from here: h t t p s : / / t u s f i l e s . c o m /ywrzlfwcrucq (link size 11.7 Mb at 01.07.2019 15-days alive)
(please remove the "space" symbol from upper link)

profit for the evening on initial balance: 100 000


enjoy !

Please add www.kreslik.com to your ad blocker white list.
Thank you for your support.


Return to “MetaTrader”