Daytime_trader,
unless I misunderstood, you're trying to get the green, magenta, and red lines to show up. (in my previous post I thought you were writing about the other horizontal support/res. lines.
Kirk
eSignal - TREND INDICATOR
Moderator: moderators
Please add www.kreslik.com to your ad blocker white list.
Thank you for your support.
Thank you for your support.
-
- rank: <50 posts
- Posts: 6
- Joined: Mon Sep 25, 2006 12:35 am
- Reputation: 0
- Gender:
Missing lines
Kirk,
You are correct, I cannot get the top, middle and bottom colored lines to show up (green, magenta, and red) for this indicator. It seems to be a problem with Globex futures, mostly the intraday Russel I am concerned with. End of day and intraday stock charts are fine, and some of the currency futures are fine on end of day charts only. As stated in my original post, the Russel intraday playback works properly. I am thinking there might be a input switch in Esignal that isn't turned on or something. Thanks for looking at this for me.
D
You are correct, I cannot get the top, middle and bottom colored lines to show up (green, magenta, and red) for this indicator. It seems to be a problem with Globex futures, mostly the intraday Russel I am concerned with. End of day and intraday stock charts are fine, and some of the currency futures are fine on end of day charts only. As stated in my original post, the Russel intraday playback works properly. I am thinking there might be a input switch in Esignal that isn't turned on or something. Thanks for looking at this for me.
D
- Gert Frobe
- rank: 150+ posts
- Posts: 177
- Joined: Fri Jun 30, 2006 9:51 pm
- Reputation: 0
- Location: Arlington, Texas
- Real name: ben arata
- Gender:
-
- rank: <50 posts
- Posts: 6
- Joined: Mon Sep 25, 2006 12:35 am
- Reputation: 0
- Gender:
Kirk,
I fiddled with some of the preferences from the drop down menu, and now the indicator is working. I don't know what fixed it, but all is good. Thanks.
The indicator is on esignal thread under "the Squeeze" and the EFS is posted on Monday February 19.
I fiddled with some of the preferences from the drop down menu, and now the indicator is working. I don't know what fixed it, but all is good. Thanks.
hi zeller4, thanks for posting your chart and were would i find the TRO-FPSqueeze at.
thanks
The indicator is on esignal thread under "the Squeeze" and the EFS is posted on Monday February 19.
Please add www.kreslik.com to your ad blocker white list.
Thank you for your support.
Thank you for your support.
Avery,
I am a bit uncertain as to how the processing of wma takes place in the TRO_SM_TREND. In the wma command lines you have [glow=red]ema [/glow]listed (i.e. if( iAvgType1 == "[highlight=red]Weighted[/highlight]" ) { xAvgr2c1 = [highlight=red]ema[/highlight]( iLength1 , inv(iInterval2) ) } . Is there a part of the code that converts this to a wma, or is this just a late night session?
Many thanks and thank you for sharing! Awesome job... will be sure to make it to your next pirate gathering as I'm in Phoenix!
Russ
I am a bit uncertain as to how the processing of wma takes place in the TRO_SM_TREND. In the wma command lines you have [glow=red]ema [/glow]listed (i.e. if( iAvgType1 == "[highlight=red]Weighted[/highlight]" ) { xAvgr2c1 = [highlight=red]ema[/highlight]( iLength1 , inv(iInterval2) ) } . Is there a part of the code that converts this to a wma, or is this just a late night session?
Many thanks and thank you for sharing! Awesome job... will be sure to make it to your next pirate gathering as I'm in Phoenix!
Russ
- TheRumpledOne
- rank: 10000+ posts
- Posts: 15564
- Joined: Sun May 14, 2006 9:31 pm
- Reputation: 3036
- Location: Oregon
- Real name: Avery T. Horton, Jr.
- Gender:
- Contact:
RuGO wrote:Avery,
I am a bit uncertain as to how the processing of wma takes place in the TRO_SM_TREND. In the wma command lines you have [glow=red]ema [/glow]listed (i.e. if( iAvgType1 == "[highlight=red]Weighted[/highlight]" ) { xAvgr2c1 = [highlight=red]ema[/highlight]( iLength1 , inv(iInterval2) ) } . Is there a part of the code that converts this to a wma, or is this just a late night session?
Many thanks and thank you for sharing! Awesome job... will be sure to make it to your next pirate gathering as I'm in Phoenix!
Russ
Looks like that's a typo/bug to me... I never use WMA so it's possible it didn't get tested. That's your job.. TEST MY CODE...LOL!
Next time, I code in eSignal, I'll have a look.
Thanks.
IT'S NOT WHAT YOU TRADE, IT'S HOW YOU TRADE IT!
Please do NOT PM me with trading or coding questions, post them in a thread.
Please do NOT PM me with trading or coding questions, post them in a thread.
-
- rank: 150+ posts
- Posts: 152
- Joined: Sat Jul 29, 2006 9:16 pm
- Reputation: 0
- Location: Geneva, FL
- Gender:
TRO DynamicFibsSR
I'm testing some text to go along with the Fibs levels. Not sure exactly how to do it without the reload... Also, trying to figure how to adjust the settings so I capture the bigger swing move from 21:30 (used the fib tool manually) - perfect retracement to the 50%! Any suggestions?
zeller4
zeller4
- Attachments
-
- TRO dynamicFibsSR
- TRO_Dynamic_FibsSR with text.png (115.88 KiB) Viewed 78477 times
-
- rank: 150+ posts
- Posts: 152
- Joined: Sat Jul 29, 2006 9:16 pm
- Reputation: 0
- Location: Geneva, FL
- Gender:
file attached (I added some lines between 238 and 251).
a) I don't know how to get it to work without reloading.
b) I'm trying to figure how to get the fib % figure to appear on the chart
any help would be greatly appreciated.
TIA
zeller
a) I don't know how to get it to work without reloading.
b) I'm trying to figure how to get the fib % figure to appear on the chart
any help would be greatly appreciated.
TIA
zeller
- Attachments
-
- TRO_DYNAMIC_FIBSSR with text.efs
- (7.89 KiB) Downloaded 637 times
Zeller,
I've attached a script that was adapted from a version downloaded from eSignalCentral. It is a bit more simplistic in that it only requires you to double-click on the chart either at the high point or the low point and it will draw the lines. To recalculate, just double-click at a new high or low... to make the lines disappear, just double-click on the empty part of the chart between the price bars and the price pane.
The script was not 'doctored' too much as I don't need more than this, but when I have the time, I'll check the one you posted and see what I can do (that unless, Master Tro doesn't beat me to the punch).
Russ
I've attached a script that was adapted from a version downloaded from eSignalCentral. It is a bit more simplistic in that it only requires you to double-click on the chart either at the high point or the low point and it will draw the lines. To recalculate, just double-click at a new high or low... to make the lines disappear, just double-click on the empty part of the chart between the price bars and the price pane.
The script was not 'doctored' too much as I don't need more than this, but when I have the time, I'll check the one you posted and see what I can do (that unless, Master Tro doesn't beat me to the punch).
Russ
zeller4 wrote:file attached (I added some lines between 238 and 251).
a) I don't know how to get it to work without reloading.
b) I'm trying to figure how to get the fib % figure to appear on the chart
any help would be greatly appreciated.
TIA
zeller
- Attachments
-
- fibo.efs
- Fib retracement tool - just double click on the chart either before a low or high, and voila...
- (10.04 KiB) Downloaded 645 times
Please add www.kreslik.com to your ad blocker white list.
Thank you for your support.
Thank you for your support.