ATTN: CODE FIX - DYNAMIC SUPPORT/RESISTANCE FUNCTIONS
Posted: Sat Jul 01, 2006 7:19 pm
There was a problem with the _fDynS and _fDynR functions.
I left date check code in... ok for indicator but NOT for this function.
ELD attached.
In the example, the first occurance of the TRO_EVALUATOR has:
(_fDynR(5)-_fDynS(5))>.0005
for both long and short entry input triggers.
This means the distance between dynamic resistance and dynamic support must be larger than 5 pips. Otherwise, the channel is too narrow.
You can see that when the lines disappear, the channel is 5 pips or less.
I left date check code in... ok for indicator but NOT for this function.
ELD attached.
In the example, the first occurance of the TRO_EVALUATOR has:
(_fDynR(5)-_fDynS(5))>.0005
for both long and short entry input triggers.
This means the distance between dynamic resistance and dynamic support must be larger than 5 pips. Otherwise, the channel is too narrow.
You can see that when the lines disappear, the channel is 5 pips or less.